X2 Transceiver

Fiber Optic Passive: Fiber Optic Bulk Cable
Indoor F.O Cable Outdoor F.O Cable Special F.O Cable FTTH Drop Cable; Fiber Optic Jumpers
LC Patchcord SC Patchcord ST Patchcord FC Patchcord MTRJ Patchcord MPO Patchcord E2000 Patchcord SMA Patchcord Hybrid Patchcord Fanout Patchcord; Fiber Optic Pigtails
LC pigtail SC Pigtail ST Pigtail FC Pigtail SMA Pigtail DIN Pigtail Breakout Pigtail Multi-fiber Colored Pigtail; Fiber Optic Connectors
LC Connector SC Connector ST Connector FC Connector E2000 Connector MTRJ Connector MPO Connector SMA Connector MU Connector DIN Connector; Fiber Optic Adapters
LC Adapter SC Adapter ST Adapter FC Adapter E2000 Adapter MTRJ Adapter MPO Adapter MU Adapter D4 Adapter DIN Adapter Hybrid Adapter Bare Fiber Adapter; Fiber Optic Attenuators
LC Attenuator SC Attenuator ST Attenuator FC Attenuator MU Attenuator In-Line Attenuator Variable Optical Attenuator; Loopback Assembly; Fiber Optic Splitter; MPO/MTP Series
Data Centre Fiber Cabling QSFP-MPO/MTP Passive Optical Cables CXP-MPO/MTP Passive Optical Cables MPO/MTP Patchcord MPO Connector Series
Fiber Optic Active: Media Converter
10/100M Media converter 1000M Media converter 10/100/1000M Media converter; Optical Transceiver; CWDM,DWDM,OADM
Structured Cabling Products: Lan Cable
Cat5e Cat6 Cat6a; Patch Cables
Cat5e Patch cable Cat6 Patch Cable Cat6a Patch cable; Patch Panel
Cat3 Voice Patch Panel Cat5e Patch Panel Cat6 Patch Panel; Keystone Jack
Cat3 Telephone Keystone Jack Cat5e Keystone Jack Cat6 Keystone Jack Cat6A Keystone Jack; 110 Wiring Block; Cable Management; Face Plate and Surface Mount Box; MINI SAS8088

Products » Fiber Optic Active » Optical Transceiver

X2 Transceiver

Optecom X2 is a standardized form factor for 10 Gb/s fiber optic transponders that is used for data transfer rates from 10.3 Gb/s to 10.5 Gb/s.

Description

Optecom X2 is a standardized form factor for 10 Gb/s fiber optic transponders that is used for data transfer rates from 10.3 Gb/s to 10.5 Gb/s. It is protocol-specific: Either 10G Ethernet or 10G Fibre Channel versions are available. X2 transponders are used in datacom optical links only (not telecom), and they are smaller than old generation XENPAK transponders. Its electrical interface to the host board is also standardized and is called XAUI (4 x 3.125 Gb/s). Eoptolink manufactures X2 300m, X2 10km, X2 20km, X2 40km, X2 80km optical modules. All modules support Digital Optical Monitoring (DOM) function .

Features:

* Operating data rate up to 10.3Gbps
* 850nm VCSEL Transmitter
* Distance up to 300m over MMF
* Single 3. 3V Power supply and TTL Logic Interface
* Duplex SC Connector Interface
* Hot Pluggable
* Operating Case Temperature
Standard: 0℃~+70℃
Industrial:-40℃~+85℃
* Compliant with MSA X2 Specification
* Digital diagnostic monitor are selectable

Applications:

* 10G Ethernet
* 1200-Mx-SN-I 10G Fibre Channel

Specifications:

Standards	IEEE Std. 802.3ae
Switch	S1: Enables/disables Link Pass Through
Status LEDs	PWR (Power): ON = connection to external AC power
	Link: ON = unit is receiving link pulses from a compliant device
	RX (Receive): ON = packets are being received
Dimensions	Width: 1.42" [36.0 mm]
	Depth: 0.53" [13.5 mm]
	Height:3.58" [91.0 mm]
Output Wavelengths	-5.5 nm < λc < +7.5 nm
Transmiter Power	-10~-1dBm
Receiver Sensitivity	-11.1~+1dB
Power	+5 V, +3.3 V
Power Consumption	4.0 W
Environment	-40 to +85°C operating
Shipping Weight	0.44 lbs. [0.20 kg]
Safety Compliance	Wall Mount Power Supply: UL Listed, C-UL Listed (Canada)
Regulatory Compliance	FCC Class A, CISPR22/EN55022 Class A, EN55024, EN61000, CE Mark
Warranty	3 years