Optecom SFP is a standard for transceivers, commonly used with Fast Ethernet,Gigabit Ethernet,1/2/4 fibre channel and SDH/SONET. By offering a standard, hot swappable electrical interface, it can support a wide range of physical media, from copper to long-wave single-mode optical fiber, at lengths of hundreds of kilometers. The appeal of the SFP standard in networking equipment, as opposed to fixed physical interface configurations, is its flexibility. Where multiple different optical technologies are in use, an administrator can purchase SFP as needed, not in advance, and they can be the specific type needed for each link. This lowers the cost of the base system and gives the administrator far more flexibility. On the other hand if it is known that a switch will mostly have one port type (especially if that port type is copper) purchasing a switch with that port type built in will probably be cheaper and take up less space per port. The SFP standard is non-proprietary and is defined by the SFF Committee in document # SFF-8472.
Features:
|
* Operating Data Rate up to 155Mbps
* 1310 FP Laser Transmitter
* 2km with 50/125 μm MMF
2km with 62.5/125 μm MMF
* Single 3. 3V Power supply and TTL Logic Interface
* Hot-Pluggable SFP Footprint Duplex LC Connector Interface
* Class 1 FDA and IEC60825-1 Laser Safety Compliant
* Operating Case Temperature
Standard: 0℃~+70℃
Industrial:-40℃~+85℃
* Compliant with SFP MSA
* Compliant with Digital Diagnostic Monitor Interface
|
|
Applications:
* Fast Ethernet
* SDH/SONET
* ATM Switches and Routers
* Other Optical Link
|
Specifications:
Standards
|
IEEE Std. 802.3ae
|
Switch
|
S1: Enables/disables Link Pass Through
|
Status LEDs
|
PWR (Power): ON = connection to external AC power
|
|
Link: ON = unit is receiving link pulses from a compliant device
|
|
RX (Receive): ON = packets are being received
|
Dimensions
|
Width: 0.54" [13.7 mm]
|
|
Depth: 0.50" [12.8 mm]
|
|
Height:2.23" [56.5 mm]
|
Output Wavelengths
|
-5.5 nm < λc < +7.5 nm
|
Transmiter Power
|
-15~-8dBm
|
Receiver Sensitivity
|
-23dB
|
Power
|
+5 V, +3.3 V
|
Power Consumption
|
4.0 W
|
Environment
|
-40 to +85°C operating
|
Shipping Weight
|
0.13 lbs. [0.06 kg]
|
Safety Compliance
|
Wall Mount Power Supply: UL Listed, C-UL Listed (Canada)
|
Regulatory Compliance
|
FCC Class A, CISPR22/EN55022 Class A, EN55024, EN61000, CE Mark
|
Warranty
|
3 years
|
|
|
|
Ss SpSSSSSS