Fiber Optic Passive
Fiber Optic Bulk Cable
Fiber Optic Jumpers
Fiber Optic Pigtails
Fiber Optic Connectors
Fiber Optic Adapters
Fiber Optic Attenuators
Loopback Assembly
Fiber Optic Splitter
MPO/MTP Series
Fiber Optic Active
Media Converter
Optical Transceiver
CWDM,DWDM,OADM
Structured Cabling Products
Lan Cable
Patch Cables
Patch Panel
Keystone Jack
110 Wiring Block
Cable Management
Face Plate and Surface Mount Box
MINI SAS8088
Newsletter
for wholesale
about the latest offers and deals Subscribe today!

BIDI SFP
Optecom SFP is a standard for transceivers, commonly used with Fast Ethernet,Gigabit Ethernet,1/2/4 fibre channel and SDH/SONET.
Description

Optecom SFP is a standard for transceivers, commonly used with Fast Ethernet,Gigabit Ethernet,1/2/4 fibre channel and SDH/SONET. By offering a standard, hot swappable electrical interface, it can support a wide range of physical media, from copper to long-wave single-mode optical fiber, at lengths of hundreds of kilometers. The appeal of the SFP standard in networking equipment, as opposed to fixed physical interface configurations, is its flexibility. Where multiple different optical technologies are in use, an administrator can purchase SFP as needed, not in advance, and they can be the specific type needed for each link. This lowers the cost of the base system and gives the administrator far more flexibility. On the other hand if it is known that a switch will mostly have one port type (especially if that port type is copper) purchasing a switch with that port type built in will probably be cheaper and take up less space per port. The SFP standard is non-proprietary and is defined by the SFF Committee in document # SFF-8472.
 

 

Features:

* Operating data rate up to 100/155Mbps
* 1550nmFP Tx/1310nmRx
* Distance up to 20km 
* Single 3. 3V Power supply and TTL Logic Interface
* Duplex LC or SC Connector Interface
* Hot Pluggable
* Operating Case Temperature
   Standard: 0℃~+70℃
   Industrial:-40℃~+85℃
* Compliant with MSA SFP Specification
* Digital diagnostic monitor are selectable 

Applications:

 

* WDM Fast Ethernet Links
* SDH/STM-1, SONET/OC3
* Metropolitan area networks
* Other optic link 



Specifications:

 

Standards

IEEE Std. 802.3ae

Switch

S1: Enables/disables Link Pass Through

Status LEDs

PWR (Power): ON = connection to external AC power

 

Link: ON = unit is receiving link pulses from a compliant device

 

RX (Receive): ON = packets are being received

Dimensions

Width: 0.54" [13.7 mm] 

 

Depth: 0.50" [12.8 mm]

 

Height:2.23" [56.5 mm]

Output Wavelengths

-5.5 nm < λc < +7.5 nm

Transmiter Power 

-14~-8dBm

Receiver Sensitivity 

-33dB

Power

+5 V, +3.3 V

Power Consumption

4.0 W

Environment

-40  to +85°C operating

Shipping Weight

0.13 lbs. [0.06 kg] 

Safety Compliance

Wall Mount Power Supply: UL Listed, C-UL Listed (Canada)

Regulatory Compliance

FCC Class A, CISPR22/EN55022 Class A, EN55024, EN61000, CE Mark

Warranty

3 years